DRAG 
DRAG 
Quick access to essential system features, including the dashboard for an overview of operations, network settings for managing connectivity, system logs for tracking activities.
Rapid reduction of large particles from 100mm to 1mm
Quick and easy to clean
Full range of bottom sieves
Can handle samples of up to 30kg/h
The Model CM500 Cutting Mill is used by Laboratories and processing Companies to granulate solid materials such as waste or wood and thermoplastics. The material to be processed falls into the cutting chamber of the CM500 via a guide chute and is shredded by cutting between rotating and fixed knives until it passes an attached sieve as ground product. The sieve extends over the lower half of the grinding chamber and is easily exchanged. Final particle size is determined by the selected sieve perforation aperture. Sieve dimension (free open surface) must be large in order to obtain: • a high throughput • a low heat creation • a homogeneous result
No other Cutting Mill is easier to clean then the CM 500 Cutting Mill. When the grinding process is finished the Front door and the Infeed Hopper can be opened sidewise and the milling chamber is fully accessible for quick and easy cleaning in order to perform a fast and systematic cleaning of the grinding tools
Rapid sieve and knife changeover
Quick and easy to clean
Performance-enhancing diagonal cutting action
No need to adjust the rotor knife
Ideal granulate quality with similar grain characteristics
No tool required to open
Outer bearing assembly protected from dust ingress
CE certified
Linoleum, Carpets, Cloth
Secondary fuels and Bio Mass
Food and Animal food
Wood, Paper, Carton, Cellulose
Rubber, Shredder Light Fractions
House Waste, Industrial Waste
Computer Scrap and Electronic Scrap
Plants, Twigs, Roots, etc.
Herbs, Spices, Grass, Straw
Bones
Technical Plastics (ABS, PA, POM, PE, etc.)
Will our equipment suit your requirements? Send us a test sample for evaluation. Our application laboratory is pleased to conduct pre-purchase trials on customer free supplied samples.
If you require a test-grinding please click the Questionnaire Milling button and fill out the form.
| Cutting Chamber | 130mm x 200mm |
| Electrical details | 3x400V/50Hz |
| Noise emission | 85 dB (A) |
| Motor power | 220V |
| Rotor | 310 rpm |
| Rotor Diameter | 150mm |
| Screen size | 1-8 mm |
| Speed | 224 rpm |
| Suction box volume | ca 6L |
| Net weight | 135 kgs (only machine) |
| Gross weight | 190 kgs (only machine) |
| Net dimensions W x D x H | app. 390 x 485 x 375 mm |
| Gross dimensions W x D x H | app. 600 x 600 x 600 mm |
| Motor | 3-phase gear motor |
| Number of Rotor knifes | 9 |
| Number of stator knifes | 2 |
| Max quantity | Up to 30 kgs per hour |
| Min quantity | 50 gr. |
| Max feed size | Up to 100 mm depending on sample |
| End-fineness | 250 μm |
| End-fineness adjustment | By interchangeable bottom sieves |